Fathah Ur Rahman
India
currently: Job hunting
|
Work history
Senior Research Fellow
tags:
vhdl
• modelsim
• verilog
• xilinx ise 9.2i
• virtex-5 fpga
How would you describe your time at CDAC,Trivandrum?
I work for the implementation of a SATA HDD Host IP Core. We worked right from the preparation of requirement specification to preliminary design document to preparation of block diagram to preparation of registry listings and registry mappings and Implementation of physical, link, transport and application layers. Currently I am doing the implementation of Transport layer.... 
Senior Software Engineer
tags:
rtos
• ethernet
• modbus
• mcf 5272
• tcp/ip
• hardware debugging
• usb otg
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Senior Software Engineer
tags:
modbus
• rtos
• hardware debugging
• usb otg
• tcp/ip
• mcf 5272
• ethernet
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Senior Software Engineer
tags:
ethernet
• rtos
• usb otg
• tcp/ip
• hardware debugging
• mcf 5272
• modbus
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Senior Software Engineer
tags:
ethernet
• modbus
• usb otg
• rtos
• hardware debugging
• tcp/ip
• mcf 5272
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Senior Software Engineer
tags:
usb otg
• modbus
• hardware debugging
• ethernet
• rtos
• mcf 5272
• tcp/ip
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Senior Software Engineer
tags:
rtos
• ethernet
• mcf 5272
• usb otg
• tcp/ip
• hardware debugging
• modbus
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Senior Software Engineer
tags:
modbus
• tcp/ip
• ethernet
• rtos
• hardware debugging
• mcf 5272
• usb otg
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Senior Software Engineer
tags:
ethernet
• hardware debugging
• tcp/ip
• rtos
• mcf 5272
• usb otg
• modbus
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Senior Software Engineer
tags:
hardware debugging
• usb otg
• mcf 5272
• modbus
• tcp/ip
• ethernet
• rtos
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Senior Software Engineer
tags:
ethernet
• usb otg
• rtos
• hardware debugging
• mcf 5272
• modbus
• tcp/ip
How would you describe your time at Optiwise Solutions?
I worked on a Process Controller (Temperature based), Flexcon-3000 at first. The processor was Freescale Coldfire based MCF5272 32-bit microcontroller. It had 32 PID loops which could be raised to 168 loops when 7 Input Output boards were stacked. It was a six-layer board.It had temperature control based on P,PI and PID loops which could be selected according to our requirement. It also had Modbus Protocol, Inhouse SCADA through ethernet ( Basically a TCP-Modbus model). It had inbuilt Data Acquisition System which could be stored in flash or else in a Hard Disk.
The next project I did was a Zigbee
(Texas Instruments CC2430 based SoC)....
Fathah's Network
>> See all contacts (1)
Similar People
Design Engineer
Holmes Electric
|
Electrical, Compu...
McGill
|
Lead Software Eng...
Flavor Grenade St...
|
MSEE
University of Sou...
|
|
CAD Engineer
PMC - Sierra
|
Sr. Engineer (Har...
L-3 Communication...
|
|
|
|
Recommendations
Fathah has very good understanding of Real Time Embedded Systems and a really good C programmer. He will be a good high level systems architect and capable of conceiving new product ideas. He is not a good presenter or communicator, but quite effective in putting his ideas in writing...
>> see all recommendations
|
Fathah has
